Motorcycle Lift For Short Bed Truck
Back tire will be 5 above the bed. Rampage unit weighs 330 pounds.
A bar is attached with two bolts through the floor and bed frame at the front of the truck bed.
Motorcycle lift for short bed truck. Front tire cradle is 6 wide and sits 7 above truck bed. It's easily installed on 8ft and 6.6ft truck beds. I might upgrade to a tacoma this year, but so many choices there.
8' truck bed, tailgate on and closed, hauling and not hauling the cycle if bike fits! The standard lift is 95 long, and 24 wide. Tailgate, down, you're looking at 79 in.
For all pickups, 3 holes are drilled through the floor and bed frame. Loadall's will never rely on your tailgate. Mighty hauler's bed loader uses a 3,000 lb winch (runs off of 12v dc) with 9' remote so you can watch your motorcycle be loaded safety into the back of your truck.
The complete line of motorcycle lift and loading systems. The motorcycle loader pivots as your bike makes its way into the bed and is fully loaded once the front tire reaches the front of your pickup box. Load all of the short bed trucks with tailgate on!!
The model 800 is for long beds and measures 48.75 inches wide by 96 inches long by 5 inches high. Patent pending design lifts your bikes with ease. Dont loose your pick up bed to a motorcycle loader, intergrate with our storage system.
The rampage lift $3,150.00 plus shipping adaptorstrike $1,050.00 sled $600.00 rollback kit $600.00 indian/low fender mod $450.00 trike/spyder ramps $295.00 hd winch upgrade 4k to 5k $185.00 spyder wide wheel cup $100.00 ford alumimum bed fastener kit $80.00 The system is connected to the truck bed through six easy to use rivet nuts which make removing and re installing the loader quick and easy. The blue ox truck ramp's chanel extensions remove quickly and store in your bed while you drive.
The model 640 is for short beds and measures 48.75 inches wide by 76 inches long. The loadall v2 loading system is available in two standard sizes for long & short bed full size pickup trucks. Maximum motorcycle weight of 1000 pounds.
All the weight from your equipment and the ramp will be displaced in your truck's bed where it belongs. Includes crane lifts, ramps systems, track loaders, slider loaders, hydraulic loaders, rampage loaders, with ratings from 1000 to 10000 pounds Double cabs looks sweet, but short bed doubles have that 5ft truck bed.
Optional extension for longer bikes. This is a 6' 6 short bed truck with the 1200 bmw loaded in 45 seconds and pulling a travel trailer with the tailgate on and set at a 45 degree angle!! Grade 8 bolts and thread into 1/2 in.
The rampage power lift ramp is the fast, easy, and safe way to load a motorcycle into a truck. 4' and 5' truck bed loaders available with load bearing receiver hitch dollies to stabilize the load while driving and carry the motorcycle weight correctly. This motorcycle truck bed loader has an effort free and unique return system.
The cruiser ramp pick up loader was designed to be a effective way to load and unload a full size motorcycle in the bed of a pickup truck. Amerideck is a hydraulic loading system for pickup truck beds. One person can load or unload a bike, and one person can usually install or remove the unit by themselves.
• installs easily into 5ft, 5.5ft, 6ft, 6.5ft or 8ft beds, including chevy avalanche. Optional attachments allow you to use the rampage with snowmobiles, trikes, personal watercraft, and more. When in use, the tailgate must be removed on 8 foot beds and placed in the down position on 5.5ft, 6ft or 6.5ft beds.
Works on bed heights up to 36 tall. Your bike rests securely about 1 above your bed for a stable ride. When required, you can disconnect and remove the lift from the bed of your truck within minutes.
The rampage power lift ramp allows for pickup bed storage and still allows you to pull a boat or camping trailer. My '88 toyota pickup has a 6ft truck bed, no problemo for moto hauling. Steel plates underneath the truck bed.
If you’re stuck using the bed of a truck, even the truck itself makes a difference. Loads with tailgate on or off! A lift arm powered by a hydraulic pump is mounted in the bed of the truck with 1/2 in.
Complete instructions are included with each lift. The lighter the bike and the longer the bed, the better. Which is enough for a sport bike, dirt bike, but you get back half of wheel hanging past tailgate.
Made in the usa quality hydraulic pump. Loadall's keeps the ramp locked in place, safe and sound under your equipment, not next to or hanging out your truck bed behind it. The motorcycle loader allows for storage and still allows you to pull a boat or trailer.
Close your tailgate with most bikes. Short bed truck motorcycle loader with tailgate on when not hauling the cycle.
